Honeycomb panel has been widely used for its advantages of environmental protection and energy saving, light weight, high strength and high stiffness. However, there are some problems that need to be paid attention to. Let the honeycomb panel manufacturer give us a detailed introduction:


1. Each part of the honeycomb panel needs to be calculated scientifically. It is necessary to check the influence of temperature, earthquake and wind pressure on the honeycomb panel from various aspects. The embedded parts, connection system, keel system, panel and fastener shall be carefully checked to ensure safety.


2. The floating connection can ensure the integrity recovery ability of the honeycomb panel, which will not cause deformation of the honeycomb plate, and avoid bulge or depression on the surface of the honeycomb panel.


3. The fixed plate method plays a stable role on the installation plate. The inconsistent force on the fixed point of each plate will cause the surface material deformation and affect the exterior decoration effect. Therefore, the fixed plate mode must adopt the fixed distance compression fixation method to ensure the surface stability of the honeycomb plate.



4. Whether there are reinforcement measures at the edge removal of the composite surface material, because the folding edge of the composite panel material only retains the thickness of the front plate, the thickness becomes thinner and the strength is reduced, so the edge removal must have reliable reinforcement measures.


5. Whether the reinforcement ribs are reasonably set at the back of the plate to increase the strength and stiffness of the plate surface. The layout distance of the stiffeners and the strength and stiffness of the stiffeners must meet the requirements to ensure the use function and safety of the honeycomb panel.


6. Whether the waterproof sealing method is reasonable or not, there are many waterproof sealing methods, such as structural waterproof, internal waterproof, gluing and sealing, and the prices of different sealing methods are not the same. Select the appropriate sealing method for engineering to ensure the function and exterior decoration effect of honeycomb panel.


7. Whether the selected materials meet the specifications, standards and design requirements.


8. Now all kinds of building materials are flooding the construction market, and the quality of materials is not the same. Choosing qualified materials is the fundamental to ensure the quality of honeycomb panels. Strict inspection means and methods must be adopted to ensure the quality of materials.


The above are the problems that should be paid attention to. Only by doing this can the normal use of the honeycomb panel not be affected, and its functions can be brought into full play to ensure safety.